Source code
Revision control
Copy as Markdown
// Copyright (C) 2016 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
#include "qbluetoothlocaldevice.h"
#include "qbluetoothlocaldevice_p.h"
#include "qbluetoothaddress.h"
#include <QtCore/QString>
QT_BEGIN_NAMESPACE
QT_IMPL_METATYPE_EXTERN_TAGGED(QBluetoothLocalDevice::Pairing, QBluetoothLocalDevice__Pairing)
QT_IMPL_METATYPE_EXTERN_TAGGED(QBluetoothLocalDevice::HostMode, QBluetoothLocalDevice__HostMode)
QT_IMPL_METATYPE_EXTERN_TAGGED(QBluetoothLocalDevice::Error, QBluetoothLocalDevice__Error)
/*!
\class QBluetoothLocalDevice
\inmodule QtBluetooth
\brief The QBluetoothLocalDevice class enables access to the local Bluetooth
device.
\since 5.2
QBluetoothLocalDevice provides functions for getting and setting the state of local Bluetooth
devices.
On iOS, this class cannot be used because the platform does not expose
any data or API which may provide information on the local Bluetooth device.
*/
/*!
\enum QBluetoothLocalDevice::Pairing
This enum describes the pairing state between the two Bluetooth devices.
\value Unpaired The Bluetooth devices are not paired.
\value Paired The Bluetooth devices are paired. The system will prompt the user for
authorization when the remote device initiates a connection to the
local device.
\value AuthorizedPaired The Bluetooth devices are paired. The system will not prompt the user
for authorization when the remote device initiates a connection to the
local device.
*/
/*!
\enum QBluetoothLocalDevice::Error
This enum describes errors that maybe returned
\value NoError No known error
\value PairingError Error in pairing
\value [since 6.4] MissingPermissionsError The operating system requests
permissions which were not
granted by the user.
\value UnknownError Unknown error
*/
/*!
\enum QBluetoothLocalDevice::HostMode
This enum describes the most of the local Bluetooth device.
\value HostPoweredOff Power off the device
\value HostConnectable Remote Bluetooth devices can connect to the local Bluetooth device
if they have previously been paired with it or otherwise know its address. This powers up the
device if it was powered off.
\value HostDiscoverable Remote Bluetooth devices can discover the presence of the local
Bluetooth device. The device will also be connectable, and powered on. On Android, this mode can only be active
for a maximum of 5 minutes.
\value HostDiscoverableLimitedInquiry Remote Bluetooth devices can discover the presence of the local
Bluetooth device when performing a limited inquiry. This should be used for locating services that are
only made discoverable for a limited period of time. This can speed up discovery between gaming devices,
as service discovery can be skipped on devices not in LimitedInquiry mode. In this mode, the device will
be connectable and powered on, if required. This mode is is not supported on Android.
\note On \macos, it is not possible to set the \l hostMode(). The
reported host modes are limited to HostPoweredOff and HostConnectable.
\note On Windows, it is not possible to set the \l hostMode() to
HostDiscoverable or HostDiscoverableLimitedInquiry. Using these modes is
equivalent to HostConnectable.
\note On HarmonyOS, changing the power state of the adapter always raises a
system dialog that the user must answer. The request therefore completes
asynchronously and may be declined, in which case \l errorOccurred() is
emitted and the host mode is left unchanged. HostDiscoverableLimitedInquiry
is not given a timeout on this platform, so the device stays discoverable
until the host mode is changed again, and the adapter reports itself back
as \l {QBluetoothLocalDevice::}{HostDiscoverable}.
\note Starting from Android 13 (API level 33) the HostPoweredOff state relies on
non-public Android API as the public one has been deprecated, see
{disable()}). This may change in a future version of Android.
\note At least on Android 12 the device's Bluetooth visibility setting may dictate the result
of setting either HostDiscoverable or HostConnectable. For example if the visibility is set
\e off, it may not be possible to enter the HostDiscoverable mode, but HostConnectable will be
used instead. This may change in future version of Android.
*/
void registerQBluetoothLocalDeviceMetaType()
{
static bool initDone = false;
if (!initDone) {
qRegisterMetaType<QBluetoothLocalDevice::HostMode>();
qRegisterMetaType<QBluetoothLocalDevice::Pairing>();
qRegisterMetaType<QBluetoothLocalDevice::Error>();
initDone = true;
}
}
#ifndef QT_OSX_BLUETOOTH
/*!
Destroys the QBluetoothLocalDevice.
*/
QBluetoothLocalDevice::~QBluetoothLocalDevice()
{
delete d_ptr;
}
/*!
Returns \c true if the QBluetoothLocalDevice represents an available local Bluetooth device;
otherwise return false.
If the local Bluetooth adapter represented by an instance of this class
is removed from the system (e.g. removal of the underlying Bluetooth dongle)
then this instance will become invalid. An already invalid QBluetoothLocalDevice instance
remains invalid even if the same Bluetooth adapter is returned to
the system.
//! [android-permissions-valid]
\note Starting from Android 12 (API level 31), the construction of this class requires
{bluetooth runtime permissions} (\e BLUETOOTH_SCAN and \e BLUETOOTH_CONNECT). If the
permissions are not granted, the device will not be valid.
//! [android-permissions-valid]
\sa allDevices()
*/
bool QBluetoothLocalDevice::isValid() const
{
if (d_ptr)
return d_ptr->isValid();
return false;
}
#endif
/*!
\fn void QBluetoothLocalDevice::setHostMode(QBluetoothLocalDevice::HostMode mode)
Sets the host mode of this local Bluetooth device to \a mode.
Some transitions such as turning the device on or off may take some time. Therefore
subsequent calls should only be made once the \l hostModeStateChanged() signal
has concluded the previous request. If this is ignored the result of such a series
of calls is not well defined.
\note Due to varying security policies on the supported platforms, this method may have
differing behaviors on the various platforms. For example the system may ask the user for
confirmation before turning Bluetooth on or off and not all host modes may be supported.
On \macos, it is not possbile to programmatically change the \l hostMode().
A user can only switch Bluetooth on/off in the System Preferences.
On Windows this method \e must be called from the UI thread because it might
require user confirmation.
Please refer to the platform specific Bluetooth documentation for details.
*/
/*!
\fn QBluetoothLocalDevice::HostMode QBluetoothLocalDevice::hostMode() const
Returns the current host mode of this local Bluetooth device. On \macos, it is either
HostPoweredOff or HostConnectable.
*/
/*!
\fn QBluetoothLocalDevice::name() const
Returns the name assgined by the user to this Bluetooth device.
*/
/*!
\fn QBluetoothLocalDevice::address() const
Returns the MAC address of this Bluetooth device.
\note On Android, this function always returns the constant
value \c {02:00:00:00:00:00} as local address starting with Android 6.0.
The programmatic access to the device's local MAC address was removed.
\note On HarmonyOS, this function always returns a null address. The system
provides no API to read the local adapter address.
*/
/*!
\fn QList<QBluetoothLocalDevice> QBluetoothLocalDevice::allDevices()
Returns a list of all available local Bluetooth devices. On \macos and
HarmonyOS, there is only the "default" local device.
\note On HarmonyOS the entry is reported only while the application holds
the Bluetooth access permission and the adapter is powered on, and its
address is null, see address(). An empty list therefore does not imply
the absence of an adapter.
*/
/*!
\fn QBluetoothLocalDevice::powerOn()
Powers on the device after returning it to the hostMode() state, if it was powered off.
\note Due to varying security policies on the supported platforms, this method may have
differing behaviors on the various platforms. For example
the system may ask the user for confirmation before turning Bluetooth on or off.
On \macos it is not possible to power on/off Bluetooth.
Please refer to the platform specific Bluetooth documentation for details.
*/
/*!
\fn QBluetoothLocalDevice::QBluetoothLocalDevice(QObject *parent)
Constructs a QBluetoothLocalDevice with \a parent.
\include qbluetoothlocaldevice.cpp android-permissions-valid
\sa isValid()
*/
/*!
\fn QBluetoothLocalDevice::hostModeStateChanged(QBluetoothLocalDevice::HostMode state)
The \a state of the host has transitioned to a different HostMode.
*/
/*!
\fn QBluetoothLocalDevice::deviceConnected(const QBluetoothAddress &address)
\since 5.3
This signal is emitted when the local device establishes a connection to a remote device
with \a address.
\sa deviceDisconnected(), connectedDevices()
*/
/*!
\fn QBluetoothLocalDevice::deviceDisconnected(const QBluetoothAddress &address)
\since 5.3
This signal is emitted when the local device disconnects from a remote Bluetooth device
with \a address.
\sa deviceConnected(), connectedDevices()
*/
/*!
\fn QList<QBluetoothAddress> QBluetoothLocalDevice::connectedDevices() const
\since 5.3
Returns the list of connected devices. This list is different from the list of currently
paired devices.
On Android and \macos, it is not possible to retrieve a list of connected devices. It is only possible to
listen to (dis)connect changes. For convenience, this class monitors all connect
and disconnect events since its instanciation and returns the current list when calling this function.
Therefore it is possible that this function returns an empty list shortly after creating an
instance.
On HarmonyOS, this function always returns an empty list. The system exposes no
device-level list of connected devices, and reports connection state only for
the individual profiles it implements, none of which Qt Bluetooth uses.
\l deviceConnected() and \l deviceDisconnected() are therefore never emitted.
\sa deviceConnected(), deviceDisconnected()
*/
/*!
\fn QBluetoothLocalDevice::pairingStatus(const QBluetoothAddress &address) const
Returns the current bluetooth pairing status of \a address, if it's unpaired, paired, or paired and authorized.
*/
/*!
\fn QBluetoothLocalDevice::requestPairing(const QBluetoothAddress &address, Pairing pairing)
Set the \a pairing status with \a address. The results are returned by the signal, pairingFinished().
On Android and \macos, AuthorizedPaired is not possible and will have the same behavior as Paired.
On Windows the exact pairing mode decision is up to the operating system.
On HarmonyOS, AuthorizedPaired has the same behavior as Paired, and it is not
possible to unpair a device. If Unpaired is requested for a paired device,
\l errorOccurred() is emitted and the device remains paired.
On \macos, it is not possible to unpair a device. If Unpaired is requested, \l pairingFinished()
is immediately emitted although the device remains paired. It is possible to request the pairing
for a previously unpaired device. In addition \l AuthorizedPaired has the same behavior as \l Paired.
Caution: creating a pairing may take minutes, and may require the user to acknowledge.
*/
/*!
\fn QBluetoothLocalDevice::pairingFinished(const QBluetoothAddress &address,
QBluetoothLocalDevice::Pairing pairing)
Pairing or unpairing has completed with \a address. Current pairing status is in \a pairing.
If the pairing request was not successful, this signal will not be emitted. The errorOccurred()
signal is emitted if the pairing request failed. The signal is only ever emitted for pairing
requests which have previously requested by calling \l requestPairing() of the current object
instance.
*/
/*!
\fn QBluetoothLocalDevice::errorOccurred(QBluetoothLocalDevice::Error error)
Signal emitted if there's an exceptional \a error while pairing or while
changing the host mode.
\since 6.2
*/
/*!
\fn QBluetoothLocalDevice::QBluetoothLocalDevice(const QBluetoothAddress &address, QObject *parent = 0)
Construct new QBluetoothLocalDevice for \a address. If \a address is default constructed
the resulting local device selects the local default device.
\include qbluetoothlocaldevice.cpp android-permissions-valid
\sa isValid()
*/
QT_END_NAMESPACE
#include "moc_qbluetoothlocaldevice.cpp"