Revision control
Copy as Markdown
// Copyright (C) 2024 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR GFDL-1.3-no-invariants-only
/*!
\example clientguide
\title Qt GRPC Client Guide
\ingroup qtgrpc-examples
\examplecategory {Networking}
\meta tag {network,protobuf,grpc,serialization,overview}
\brief The Qt GRPC client guide.
\section1 Service Methods
In \gRPC, service methods can be defined in a protobuf schema to specify the
communication between clients and servers. The protobuf compiler,
\c{protoc}, can then generate the required server and client interfaces
based on these definitions. \gRPC supports four types of service methods:
\list
\li \l{Unary Calls} — The client sends a single request and receives a
single response.
\badcode
rpc UnaryCall (Request) returns (Response);
\endcode
The corresponding client handler is QGrpcCallReply.
\li \l{Server Streaming} — The client sends a single request and
receives multiple responses.
\badcode
rpc ServerStreaming (Request) returns (stream Response);
\endcode
The corresponding client handler is QGrpcServerStream.
\li \l{Client Streaming} — The client sends multiple requests and
receives a single response.
\badcode
rpc ClientStreaming (stream Request) returns (Response);
\endcode
The corresponding client handler is QGrpcClientStream.
\li \l{Bidirectional Streaming} — The client and server exchange
multiple messages.
\badcode
rpc BidirectionalStreaming (stream Request) returns (stream Response);
\endcode
The corresponding client handler is QGrpcBidiStream.
\endlist
\gRPC communication always starts with the client, which initiates the
call} (RPC) by sending the first message to the server. The server then
concludes any type of communication by returning a \l{QtGrpc::}
{StatusCode}.
All client RPC handlers are derived from the QGrpcOperation class, which
provides shared functionality. Due to the asynchronous nature of RPCs, they
are naturally managed through Qt's \l{Signals & Slots} mechanism.
A key signal common to all RPC handlers is \l{QGrpcOperation::} {finished},
which indicates the completion of an RPC. The handler emits this signal
exactly once during its lifetime. This signal delivers the corresponding
QGrpcStatus, providing additional information about the success or failure
of the RPC.
There are also operation-specific functionalities, such as \l{QGrpcServerStream::}
{messageReceived} for incoming messages, \l{QGrpcClientStream::}
{writeMessage} for sending messages to the server, and
\l{QGrpcBidiStream::} {writesDone} for closing client-side communication.
The table below outlines the supported functionality of the RPC client
handlers:
\table 85 %
\header
\li Functionality
\li QGrpcCallReply
\li QGrpcServerStream
\li QGrpcClientStream
\li QGrpcBidiStream
\row
\li \l {QGrpcOperation::}{finished}
\li ✓ (\l{QGrpcOperation::}{read} final response)
\li ✓
\li ✓ (\l{QGrpcOperation::}{read} final response)
\li ✓
\row
\li \l {QGrpcServerStream::}{messageReceived}
\li ✗
\li ✓
\li ✗
\li ✓
\row
\li \l {QGrpcClientStream::}{writeMessage}
\li ✗
\li ✗
\li ✓
\li ✓
\row
\li \l {QGrpcBidiStream::}{writesDone}
\li ✗
\li ✗
\li ✓
\li ✓
\endtable
\section1 Getting Started
To use the Qt GRPC C++ API, start by using an already available protobuf
schema or define your own. We will use the \c {clientguide.proto} file as
an example:
\snippet clientguide/proto/clientguide.proto 0
To use this \e {.proto} file for our Qt GRPC client in C++, we must run
the \c protoc compiler with the Qt generator plugins on it. Fortunately, Qt
provides the \l{qt_add_grpc} and \l{qt_add_protobuf} CMake functions to
streamline this process.
\snippet clientguide/client/CMakeLists.txt 0
This results in two header files being generated in the current build
directory:
\list
\li \e {clientguide.qpb.h}: Generated by \l{The qtprotobufgen
Tool}{qtprotobufgen}. Declares the \c Request and \c Response
protobuf messages from the schema.
\li \e {clientguide_client.grpc.qpb.h}: Generated by \l{The qtgrpcgen
Tool}{qtgrpcgen}. Declares the client interface for calling the
methods of a \gRPC server implementing the \c ClientGuideService
from the schema.
\endlist
The following client interface is generated:
\code
namespace client::guide {
namespace ClientGuideService {
class Client : public QGrpcClientBase
{
...
std::unique_ptr<QGrpcCallReply> UnaryCall(const client::guide::Request &arg);
std::unique_ptr<QGrpcServerStream> ServerStreaming(const client::guide::Request &arg);
std::unique_ptr<QGrpcClientStream> ClientStreaming(const client::guide::Request &arg);
std::unique_ptr<QGrpcBidiStream> BidirectionalStreaming(const client::guide::Request &arg);
...
};
} // namespace ClientGuideService
} // namespace client::guide
\endcode
\include qtgrpc-shared.qdocinc rpc-lifetime-note
\section2 Server Setup
The server implementation for the \c ClientGuideService follows a
straightforward approach. It validates the request message's \c time field,
returning the \c INVALID_ARGUMENT status code if the time is in the future:
\snippet clientguide/server/main.cpp time
Additionally, the server sets the current time in every response message:
\snippet clientguide/server/main.cpp response
For valid \c time requests, the service methods behave as follows:
\list
\li \c{UnaryCall}: Responds with the \c num field from the request.
\li \c{ServerStreaming}: Sends \c num responses matching the request
message.
\li \c{ClientStreaming}: Counts the number of request messages and sets
this count as \c num.
\li \c{BidirectionalStreaming}: Immediately responds with the \c num
field from each incoming request message.
\endlist
\section2 Client Setup
We begin by including the generated header files:
\snippet clientguide/client/main.cpp gen-includes
For this example, we create the \c ClientGuide class to manage all
communication, making it easier to follow. We begin by setting up the
backbone of all \gRPC communication: a channel.
\snippet clientguide/client/main.cpp basic-0
The Qt GRPC library offers QGrpcHttp2Channel, which you can
\l{QGrpcClientBase::attachChannel} {attach} to the generated
client interface:
\snippet clientguide/client/main.cpp basic-1
With this setup, the client will communicate over HTTP/2 using TCP as the
transport protocol. The communication will be unencrypted (i.e. without
SSL/TLS setup).
\section3 Creating a request message
Here's a simple wrapper to create request messages:
\snippet clientguide/client/main.cpp basic-2
This function takes an integer and an optional boolean. By default its
messages use the current time, so the \l{Server Setup}{server logic} should
accept them. When called with \c fail set to \c true, however, it produces
messages that the server shall reject.
\section2 Single Shot RPCs
There are different paradigms for working with RPC client handlers.
Specifically, you can choose a class-based design where the RPC handler is
a member of the enclosing class, or you can manage the lifetime of the RPC
handler through the \l {QGrpcOperation::} {finished} signal.
There are two important things to remember when applying the single-shot
paradigm. The code below demonstrates how it would work for unary calls,
but it's the same for any other RPC type.
\code
std::unique_ptr<QGrpcCallReply> reply = m_client.UnaryCall(requestMessage);
const auto *replyPtr = reply.get(); // 1
QObject::connect(
replyPtr, &QGrpcCallReply::finished, replyPtr,
[reply = std::move(reply)](const QGrpcStatus &status) {
...
},
Qt::SingleShotConnection // 2
);
\endcode
\list
\li \b{1}: Since we manage the lifetime of the unique RPC object within
the lambda, moving it into the lambda's capture would invalidate \c
{get()} and other member functions. Therefore, we must copy the
pointers address before moving it.
\li \b{2}: The \l{QGrpcOperation::}{finished} signal is emitted only
once, making this a true single-shot connection. It is \b{important}
to mark this connection as \l{Qt::}{SingleShotConnection}! If not,
the capture of \c reply will not be destroyed, leading to a \b
{hidden memory leak} that is hard to discover.
\endlist
The \l{Qt::}{SingleShotConnection} argument in the \c{connect} call ensures
that the slot functor (the lambda) is destroyed after being emitted,
freeing the resources associated with the slot, including its captures.
\section1 Remote Procedure Calls
\section2 Unary Calls
Unary calls require only the \l {QGrpcOperation::} {finished} signal to be
handled. When this signal is emitted, we can check the \l {QGrpcStatus}
{status} of the RPC to determine if it was successful. If it was, we can \l
{QGrpcOperation::} {read} the single and final response from the server.
In this example, we use the single-shot paradigm. Ensure you carefully read
the \l {Single Shot RPCs} section.
\snippet clientguide/client/main.cpp unary-0
The function starts the RPC by invoking the \c UnaryCall member function
of the generated client interface \c m_client. The lifetime is solely
managed by the \l{QGrpcCallReply::} {finished} signal.
\details {Running the code}
In \c main, we simply invoke this function three times, letting the
second invocation fail:
\snippet clientguide/client/main.cpp unary-1
A possible output of running this could look like the following:
\badcode
Welcome to the clientguide!
Starting the server process ...
Server listening on: localhost:50056
Server (UnaryCall): Request( time: 1733498584776, num: 1 )
Server (UnaryCall): Request( time: 9223372036854775807, num: 2 )
Server (UnaryCall): Request( time: 1733498584776, num: 3 )
Client (UnaryCall) finished, received: Response( time: 1733498584778257 , num: 1 )
Client (UnaryCall) failed: QGrpcStatus( code: QtGrpc::StatusCode::InvalidArgument, message: "Request time is in the future!" )
Client (UnaryCall) finished, received: Response( time: 1733498584778409 , num: 3 )
\endcode
We see the server receiving the three messages, with the second
containing a large value for its time. On the client side, the first
and last calls returned an \l {QtGrpc::StatusCode::} {Ok} status code,
but the second message failed with the \l {QtGrpc::StatusCode::}
{InvalidArgument} status code due to the message time being in the future.
\enddetails
\section2 Server Streaming
In a server stream, the client sends an initial request, and the server
responds with one or more messages. In addition to the \l{QGrpcOperation::}
{finished} signal you also have to handle the \l{QGrpcServerStream::}
{messageReceived} signal.
In this example, we use the single-shot paradigm to manage the streaming RPC
lifecycle. Ensure you carefully read the \l {Single Shot RPCs} section.
As with any RPC, we connect to the \l{QGrpcOperation::} {finished} signal
first:
\snippet clientguide/client/main.cpp sstream-0
To handle the server messages, we connect to the \l{QGrpcServerStream::}
{messageReceived} signal and \l{QGrpcOperation::} {read} the response when
the signal is emitted.
\snippet clientguide/client/main.cpp sstream-1
\details {Running the code}
The server logic streams back the amount received in the initial
request to the client. We create such a request and invoke the
function.
\snippet clientguide/client/main.cpp sstream-2
A possible output of running the server streaming could look like this:
\badcode
Welcome to the clientguide!
Starting the server process ...
Server listening on: localhost:50056
Server (ServerStreaming): Request( time: 1733504435800, num: 3 )
Client (ServerStream) received: Response( time: 1733504435801724 , num: 0 )
Client (ServerStream) received: Response( time: 1733504435801871 , num: 1 )
Client (ServerStream) received: Response( time: 1733504435801913 , num: 2 )
Client (ServerStreaming) finished
\endcode
Once the server starts, it receives a request with a \e num value of 3
and responds with three \c Response messages before completing the
communication.
\enddetails
\section2 Client Streaming
In a client stream, the client sends one or more requests, and the server
responds with a single final response. The \l {QGrpcOperation::} {finished}
signal must be handled, and messages can be sent using the
\l{QGrpcClientStream::} {writeMessage} function. The
\l{QGrpcClientStream::} {writesDone} function can then be used to indicate
that the client has finished writing and that no more messages will be
sent.
We use a class-based approach to interact with the streaming RPC,
incorporating the handler as a member of the class. As with any RPC, we
connect to the \l {QGrpcOperation::} {finished} signal:
\snippet clientguide/client/main.cpp cstream-0
The function starts the client stream with an initial message. Then it
continues to write two additional messages before signaling the end of
communication by calling \l{QGrpcClientStream::}{writesDone}. If the
streaming RPC succeeds, we \l {QGrpcOperation::} {read} the final response
from the server and \c reset the RPC object. If the RPC fails, we retry
by invoking the same function, which overwrites the \c m_clientStream
member and reconnects the \l {QGrpcOperation::} {finished} signal. We
cannot simply reassign the \c m_clientStream member within the lambda, as
this would lose the necessary connection.
\details {Running the code}
In \c main, we invoke the \c clientStreaming function with a failing
message, triggering an RPC failure and executing the retry logic.
\snippet clientguide/client/main.cpp cstream-1
A possible output of running the client streaming could look like this:
\badcode
Welcome to the clientguide!
Starting the server process ...
Server listening on: localhost:50056
Server (ClientStreaming): Request( time: 9223372036854775807, num: 0 )
Client (ClientStreaming) failed: QGrpcStatus( code: QtGrpc::StatusCode::InvalidArgument, message: "Request time is in the future!" )
Restarting the client stream
Server (ClientStreaming): Request( time: 1733912946696, num: 0 )
Server (ClientStreaming): Request( time: 1733912946697, num: 1 )
Server (ClientStreaming): Request( time: 1733912946697, num: 2 )
Client (ClientStreaming) finished, received: Response( time: 1733912946696922 , num: 3 )
\endcode
The server receives an initial message that causes the RPC to fail,
triggering the retry logic. The retry starts the RPC with a valid
message, after which three messages are sent to the server before
completing gracefully.
\enddetails
\section2 Bidirectional Streaming
Bidirectional streaming offers the most flexibility, allowing both the
client and server to send and receive messages simultaneously. It requires
the \l {QGrpcOperation::} {finished} and \l {QGrpcBidiStream::}
{messageReceived} signal to be handled and provides the write functionality
through \l {QGrpcBidiStream::} {writeMessage}.
We use a class-based approach with member function \e slot connections to
demonstrate the functionality, incorporating the handler as a member of the
class. Additionally, we utilize the pointer-based \l {QGrpcOperation::}
{read} function. The two members used are:
\snippet clientguide/client/main.cpp bstream-0
We create a function to start the bidirectional streaming from an initial
message and connect the slot functions to the respective \l
{QGrpcOperation::} {finished} and \l {QGrpcBidiStream::} {messageReceived}
signals.
\snippet clientguide/client/main.cpp bstream-1
The slot functionality is straightforward. The \l {QGrpcOperation::}
{finished} slot simply prints and resets the RPC object:
\snippet clientguide/client/main.cpp bstream-2
The \l {QGrpcBidiStream::} {messageReceived} slot \l {QGrpcOperation::}
{read}s into the \c m_bidiResponse member, continuing to write messages
until the received response number hits zero. At that point, we half-close
the client-side communication using \l {QGrpcBidiStream::} {writesDone}.
\snippet clientguide/client/main.cpp bstream-3
\details {Running the code}
The server logic simply returns a message as soon as it reads
something, creating a response with the number from the request. In \c
main, we create such a request, which ultimately serves as a counter.
\snippet clientguide/client/main.cpp bstream-4
A possible output of running the bidirectional streaming could look
like this:
\badcode
Welcome to the clientguide!
Starting the server process ...
Server listening on: localhost:50056
Server (BidirectionalStreaming): Request( time: 1733503832107, num: 3 )
Client (BidirectionalStreaming) received: Response( time: 1733503832108708 , num: 3 )
Server (BidirectionalStreaming): Request( time: 1733503832109, num: 2 )
Client (BidirectionalStreaming) received: Response( time: 1733503832109024 , num: 2 )
Server (BidirectionalStreaming): Request( time: 1733503832109, num: 1 )
Client (BidirectionalStreaming) received: Response( time: 1733503832109305 , num: 1 )
Server (BidirectionalStreaming): Request( time: 1733503832109, num: 0 )
Client (BidirectionalStreaming) received: Response( time: 1733503832109529 , num: 0 )
Client (BidirectionalStreaming) finished
\endcode
\enddetails
*/