Revision control
Copy as Markdown
// Copyright (C) 2021 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR GPL-3.0-only
// Qt-Security score:significant reason:default
#include "qphysicsworld_p.h"
#include "physxnode/qabstractphysxnode_p.h"
#include "physxnode/qphysxworld_p.h"
#include "qabstractphysicsnode_p.h"
#include "qdebugdrawhelper_p.h"
#include "qphysicsutils_p.h"
#include "joints/qjoint_p.h"
#include "qstaticphysxobjects_p.h"
#include "qboxshape_p.h"
#include "qsphereshape_p.h"
#include "qconvexmeshshape_p.h"
#include "qtrianglemeshshape_p.h"
#include "qcharactercontroller_p.h"
#include "qcapsuleshape_p.h"
#include "qplaneshape_p.h"
#include "qheightfieldshape_p.h"
#include "qtriggerbody_p.h"
#include "PxPhysicsAPI.h"
#include "cooking/PxCooking.h"
#include <foundation/PxSimpleTypes.h>
#include <QtQuick/private/qquickframeanimation_p.h>
#include <QtQuick3D/private/qquick3dobject_p.h>
#include <QtQuick3D/private/qquick3dnode_p.h>
#include <QtQuick3D/private/qquick3dmodel_p.h>
#include <QtQuick3D/private/qquick3dprincipledmaterial_p.h>
#include <QtQuick3DUtils/private/qssgutils_p.h>
#include <QtCore/qvarlengtharray.h>
#include <QtGui/qquaternion.h>
#include <QtEnvironmentVariables>
QT_BEGIN_NAMESPACE
/*!
\qmltype PhysicsWorld
\inqmlmodule QtQuick3D.Physics
\since 6.4
\brief Controls the physics simulation.
The PhysicsWorld type controls the physics simulation. This node is used to create an instance of the physics world as well
as define its properties. There can only be one physics world. All collision nodes in the qml
will get added automatically to the physics world.
*/
/*!
\qmlproperty vector3d PhysicsWorld::gravity
This property defines the gravity vector of the physics world.
The default value is \c (0, -981, 0). Set the value to \c{Qt.vector3d(0, -9.81, 0)} if your
unit of measurement is meters and you are simulating Earth gravity.
*/
/*!
\qmlproperty bool PhysicsWorld::running
This property starts or stops the physical simulation. The default value is \c true.
*/
/*!
\qmlproperty bool PhysicsWorld::forceDebugDraw
This property enables debug drawing of all active shapes in the physics world. The default value
is \c false.
*/
/*!
\qmlproperty bool PhysicsWorld::enableCCD
\deprecated [6.13] Use DynamicRigidBody::ccd instead.
This property enables continuous collision detection globally for every dynamic body
in the scene that does not explicitly set its own \l DynamicRigidBody::ccd mode.
It reduces the risk of fast-moving bodies passing through geometry at high velocities
(also known as tunnelling).
For non-kinematic dynamic bodies, enabling this property uses sweep-based CCD.
For kinematic bodies, it automatically uses speculative CCD, as sweep-based CCD
is not supported for them.
Continuous collision detection can also be configured per body via
\l DynamicRigidBody::ccd, which avoids paying its performance cost for
objects that do not need it.
\warning Using trigger bodies with CCD enabled is not supported and can
result in missing or false trigger reports.
\default false
\sa DynamicRigidBody::ccd
*/
/*!
\qmlproperty real PhysicsWorld::typicalLength
This property defines the approximate size of objects in the simulation. This is used to
estimate certain length-related tolerances. Objects much smaller or much larger than this
size may not behave properly. The default value is \c 100.
Range: \c{[0, inf]}
*/
/*!
\qmlproperty real PhysicsWorld::typicalSpeed
This property defines the typical magnitude of velocities of objects in simulation. This is used
to estimate whether a contact should be treated as bouncing or resting based on its impact
velocity, and a kinetic energy threshold below which the simulation may put objects to sleep.
For normal physical environments, a good choice is the approximate speed of an object falling
under gravity for one second. The default value is \c 1000.
Range: \c{[0, inf]}
*/
/*!
\qmlproperty real PhysicsWorld::defaultDensity
This property defines the default density of dynamic objects, measured in kilograms per cubic
unit. This is equal to the weight of a cube with side \c 1.
The default value is \c 0.001, corresponding to 1 g/cm³: the density of water. If your unit of
measurement is meters, a good value would be \c 1000. Note that only positive values are
allowed.
Range: \c{(0, inf]}
*/
/*!
\qmlproperty Node PhysicsWorld::viewport
This property defines the viewport where debug components will be drawn if \l{forceDebugDraw}
is enabled. If unset the \l{scene} node will be used.
\sa forceDebugDraw, scene
*/
/*!
\qmlproperty real PhysicsWorld::minimumTimestep
This property defines the minimum simulation timestep in milliseconds. The default value is
\c{1}.
Range: \c{[0, maximumTimestep]}
\note The simulation timestep works in lockstep with the rendering,
meaning a new simulation frame will only be started after a rendered frame
has completed. This means that at most one simulation frame will run per
rendered frame.
*/
/*!
\qmlproperty real PhysicsWorld::maximumTimestep
This property defines the maximum simulation timestep in milliseconds. The default value is
\c{33.333}.
Range: \c{[0, inf]}
\note The simulation timestep works in lockstep with the rendering,
meaning a new simulation frame will only be started after a rendered frame
has completed. This means that at most one simulation frame will run per
rendered frame.
*/
/*!
\qmlproperty Node PhysicsWorld::scene
This property defines the top-most Node that contains all the nodes of the physical
simulation. All physics objects that are an ancestor of this node will be seen as part of this
PhysicsWorld.
\note Using the same scene node for several PhysicsWorld is unsupported.
*/
/*!
\qmlsignal PhysicsWorld::frameDone(float timestep)
\since 6.5
This signal is emitted when the physical simulation is done simulating a frame. The \a timestep
parameter is how long in milliseconds the timestep was in the simulation.
*/
/*!
\qmlproperty int PhysicsWorld::numThreads
\since 6.7
This property defines the number of threads used for the physical simulation. This is how the
range of values are interpreted:
\table
\header
\li Value
\li Range
\li Description
\row
\li Negative
\li \c{[-inf, -1]}
\li Automatic thread count. The application will try to query the number of threads from the
system.
\row
\li Zero
\li \c{{0}}
\li No threading, simulation will run sequentially.
\row
\li Positive
\li \c{[1, 256]}
\li Specific thread count. Values above 256 are clamped.
\endtable
The default value is \c{-1}, meaning automatic thread count.
\note Once the scene has started running it is not possible to change the number of threads.
*/
/*!
\qmlproperty bool PhysicsWorld::reportKinematicKinematicCollisions
\since 6.7
This property controls if collisions between pairs of \e{kinematic} dynamic rigid bodies will
trigger a contact report.
The default value is \c{false}.
\note Once the scene has started running it is not possible to change this setting.
\sa PhysicsWorld::reportStaticKinematicCollisions
\sa DynamicRigidBody
\sa PhysicsNode::bodyContact
*/
/*!
\qmlproperty bool PhysicsWorld::reportStaticKinematicCollisions
\since 6.7
This property controls if collisions between a static rigid body and a \e{kinematic} dynamic
rigid body will trigger a contact report.
The default value is \c{false}.
\note Once the scene has started running it is not possible to change this setting.
\sa PhysicsWorld::reportKinematicKinematicCollisions
\sa StaticRigidBody
\sa DynamicRigidBody
\sa PhysicsNode::bodyContact
*/
/*!
\qmlproperty QueryStructure PhysicsWorld::staticQueryStructure
\since 6.13
The spatial pruning structure type used to accelerate scene queries
(raycasts, sweeps, overlaps - used in CharacterController and a \e{kinematic} dynamic rigid body)
against static actors in the physics scene. It has no effect on rigid-body
contact/collision detection during simulation.
The following values are available:
\value PhysicsWorld.StaticTree
Uses a pre-baked static AABB tree. Offers maximum scene query performance with zero per-frame management overhead.
Best for fully static, immutable scenes. Inserting or removing objects at runtime causes heavy scene rebuilds and frame spikes.
\value PhysicsWorld.DynamicTree
Uses a dynamic self-balancing AABB tree. Allows fast, local runtime insertion (logarithmic time) and removal of static objects without freezing the frame.
Ideal for seamless open-world streaming where static chunks are loaded dynamically.
\default PhysicsWorld.DynamicTree
\note Once the scene has started running it is not possible to change this setting.
\note PhysicsWorld.NoStructure is not supported for staticQueryStructure
\sa PhysicsWorld::dynamicQueryStructure
*/
/*!
\qmlproperty QueryStructure PhysicsWorld::dynamicQueryStructure
\since 6.13
The spatial pruning structure type used to accelerate scene queries
(raycasts, sweeps, overlaps - used in CharacterController and a \e{kinematic} dynamic rigid body)
against dynamic actors in the physics scene. It has no effect on rigid-body
contact/collision detection during simulation.
The following values are available:
\value PhysicsWorld.NoStructure
Disables the scene query acceleration structure for dynamic actors.
Eliminates CPU overhead for tree maintenance when objects move, spawn, or are destroyed.
Scene queries will fall back to a linear search. Ideal when scene queries are not needed for dynamic objects.
\value PhysicsWorld.StaticTree
Uses a static AABB tree. Offers faster scene queries for dynamic actors, but updating the tree when objects move or spawn is very expensive.
Best when dynamic actors rarely move or spend most of their time sleeping.
\value PhysicsWorld.DynamicTree
Uses a dynamic self-balancing AABB tree. Allows fast, local runtime insertion (logarithmic time), movement, and removal of dynamic objects without freezing the frame.
Ideal for active scenes with frequently moving or spawning dynamic actors.
\default PhysicsWorld.DynamicTree
\note Once the scene has started running it is not possible to change this setting.
\sa PhysicsWorld::staticQueryStructure
*/
Q_LOGGING_CATEGORY(lcQuick3dPhysics, "qt.quick3d.physics");
// Setting QT_PHYSICS_TIMINGS_FILE to a filepath will generate a csv file with frame timings.
// Note that if running several PhysicsWorld's the last one to be destructed will overwrite
// the output file.
//
// To view it in gnuplot, run these two commands:
//
// set datafile separator ','
// plot '<QT_PHYSICS_TIMINGS_FILE>' using 1:2 with lines
//
// Security note: This file is trusted since it is opened as write-only
static const QString qtPhysicsTimingsFile = qEnvironmentVariable("QT_PHYSICS_TIMINGS_FILE");
/////////////////////////////////////////////////////////////////////////////
class FrameAnimator : public QQuickFrameAnimation
{
Q_OBJECT
public:
FrameAnimator() : QQuickFrameAnimation()
{
// Needed to start the frame animation
classBegin();
componentComplete();
}
};
/////////////////////////////////////////////////////////////////////////////
void QPhysicsWorld::DebugModelHolder::releaseMeshPointer()
{
if (auto base = static_cast<physx::PxBase *>(ptr); base)
base->release();
ptr = nullptr;
}
const QVector3D &QPhysicsWorld::DebugModelHolder::halfExtents() const
{
return data;
}
void QPhysicsWorld::DebugModelHolder::setHalfExtents(const QVector3D &halfExtents)
{
data = halfExtents;
}
float QPhysicsWorld::DebugModelHolder::radius() const
{
return data.x();
}
void QPhysicsWorld::DebugModelHolder::setRadius(float radius)
{
data.setX(radius);
}
float QPhysicsWorld::DebugModelHolder::heightScale() const
{
return data.x();
}
void QPhysicsWorld::DebugModelHolder::setHeightScale(float heightScale)
{
data.setX(heightScale);
}
float QPhysicsWorld::DebugModelHolder::halfHeight() const
{
return data.y();
}
void QPhysicsWorld::DebugModelHolder::setHalfHeight(float halfHeight)
{
data.setY(halfHeight);
}
float QPhysicsWorld::DebugModelHolder::rowScale() const
{
return data.y();
}
void QPhysicsWorld::DebugModelHolder::setRowScale(float rowScale)
{
data.setY(rowScale);
}
float QPhysicsWorld::DebugModelHolder::columnScale() const
{
return data.z();
}
void QPhysicsWorld::DebugModelHolder::setColumnScale(float columnScale)
{
data.setZ(columnScale);
}
physx::PxConvexMesh *QPhysicsWorld::DebugModelHolder::getConvexMesh()
{
return static_cast<physx::PxConvexMesh *>(ptr);
}
void QPhysicsWorld::DebugModelHolder::setConvexMesh(physx::PxConvexMesh *mesh)
{
ptr = static_cast<void *>(mesh);
}
physx::PxTriangleMesh *QPhysicsWorld::DebugModelHolder::getTriangleMesh()
{
return static_cast<physx::PxTriangleMesh *>(ptr);
}
void QPhysicsWorld::DebugModelHolder::setTriangleMesh(physx::PxTriangleMesh *mesh)
{
ptr = static_cast<void *>(mesh);
}
physx::PxHeightField *QPhysicsWorld::DebugModelHolder::getHeightField()
{
return static_cast<physx::PxHeightField *>(ptr);
}
void QPhysicsWorld::DebugModelHolder::setHeightField(physx::PxHeightField *hf)
{
ptr = static_cast<physx::PxHeightField *>(hf);
}
/////////////////////////////////////////////////////////////////////////////
struct QWorldManager
{
QVector<QPhysicsWorld *> worlds;
QVector<QAbstractPhysicsNode *> orphanNodes;
QVector<QPhysicsJoint *> orphanJoints;
};
static QWorldManager worldManager = QWorldManager {};
void QPhysicsWorld::registerNode(QAbstractPhysicsNode *physicsNode)
{
auto world = getWorld(physicsNode);
if (world) {
world->m_newPhysicsNodes.push_back(physicsNode);
} else {
worldManager.orphanNodes.push_back(physicsNode);
}
}
void QPhysicsWorld::deregisterNode(QAbstractPhysicsNode *physicsNode)
{
for (auto world : std::as_const(worldManager.worlds)) {
world->m_newPhysicsNodes.removeAll(physicsNode);
if (physicsNode->m_backendObject) {
Q_ASSERT(physicsNode->m_backendObject->frontendNode == physicsNode);
physicsNode->m_backendObject->frontendNode = nullptr;
physicsNode->m_backendObject->isRemoved = true;
physicsNode->m_backendObject = nullptr;
}
world->m_removedPhysicsNodes.insert(physicsNode);
}
worldManager.orphanNodes.removeAll(physicsNode);
}
void QPhysicsWorld::registerJoint(QPhysicsJoint *joint)
{
auto world = getWorld(joint);
if (world) {
world->m_joints.push_back(joint);
} else {
worldManager.orphanJoints.push_back(joint);
}
}
void QPhysicsWorld::deregisterJoint(QPhysicsJoint *joint)
{
for (auto world : worldManager.worlds) {
world->m_removedJoints.insert(joint->getPhysXBackend());
// Swap erase since order does not matter
qsizetype idx = world->m_joints.indexOf(joint);
if (idx != -1) {
world->m_joints.swapItemsAt(idx, world->m_joints.size() - 1);
world->m_joints.pop_back();
}
}
worldManager.orphanJoints.removeAll(joint);
}
void QPhysicsWorld::registerContact(QAbstractPhysicsNode *sender, QAbstractPhysicsNode *receiver,
const QVector<QVector3D> &positions,
const QVector<QVector3D> &impulses,
const QVector<QVector3D> &normals)
{
// The callbacks come from fetchResults(), on this thread, but a contact is
// between two nodes and reporting the first is free to delete the second.
// So the contacts are saved and run at the end of the physics frame, when
// it is known which of their nodes are still there.
BodyContact contact;
contact.sender = sender;
contact.receiver = receiver;
contact.positions = positions;
contact.impulses = impulses;
contact.normals = normals;
m_registeredContacts.push_back(contact);
}
QPhysicsWorld::QPhysicsWorld(QObject *parent) : QObject(parent)
{
m_inDesignStudio = !qEnvironmentVariableIsEmpty("QML_PUPPET_MODE");
m_physx = new QPhysXWorld;
m_physx->createWorld();
worldManager.worlds.push_back(this);
matchOrphanNodes();
matchOrphanJoints();
m_frameAnimator = new FrameAnimator;
connect(m_frameAnimator, &QQuickFrameAnimation::triggered, this,
&QPhysicsWorld::simulateFrame);
}
QPhysicsWorld::~QPhysicsWorld()
{
if (m_frameAnimator) {
m_frameAnimator->stop();
delete m_frameAnimator;
}
if (m_physx->scene && m_physx->isRunning && !m_frameFetched)
m_physx->scene->fetchResults(true);
for (auto body : std::as_const(m_physXBodies)) {
body->cleanup(m_physx);
delete body;
}
m_physXBodies.clear();
m_physx->deleteWorld();
delete m_physx;
worldManager.worlds.removeAll(this);
if (!qtPhysicsTimingsFile.isEmpty()) {
if (m_frameTimings.isEmpty()) {
qWarning() << "No frame timings saved.";
} else if (auto csvFile = QFile(qtPhysicsTimingsFile); csvFile.open(QIODevice::WriteOnly)) {
QTextStream out(&csvFile);
for (int i = 1; i < m_frameTimings.size(); i++) {
out << i << "," << m_frameTimings[i] << '\n';
}
csvFile.close();
} else {
qWarning() << "Could not open timings file " << qtPhysicsTimingsFile;
}
}
}
void QPhysicsWorld::classBegin() {}
void QPhysicsWorld::componentComplete()
{
if ((!m_running && !m_inDesignStudio) || m_physicsInitialized)
return;
initPhysics();
}
QVector3D QPhysicsWorld::gravity() const
{
return m_gravity;
}
bool QPhysicsWorld::running() const
{
return m_running;
}
bool QPhysicsWorld::forceDebugDraw() const
{
return m_forceDebugDraw;
}
bool QPhysicsWorld::enableCCD() const
{
return m_enableCCD;
}
float QPhysicsWorld::typicalLength() const
{
return m_typicalLength;
}
float QPhysicsWorld::typicalSpeed() const
{
return m_typicalSpeed;
}
bool QPhysicsWorld::isNodeRemoved(QAbstractPhysicsNode *object)
{
return m_removedPhysicsNodes.contains(object);
}
void QPhysicsWorld::setGravity(QVector3D gravity)
{
if (m_gravity == gravity)
return;
if (!QPhysicsUtils::isFinite(gravity)) {
qWarning() << "Warning: 'gravity' must be finite, ignored";
return;
}
m_gravity = gravity;
if (m_physx->scene) {
m_physx->scene->setGravity(QPhysicsUtils::toPhysXType(m_gravity));
}
emit gravityChanged(m_gravity);
}
void QPhysicsWorld::setRunning(bool running)
{
if (m_running == running)
return;
m_running = running;
if (!m_inDesignStudio && m_running && !m_physicsInitialized)
initPhysics();
if (running)
m_frameAnimator->start();
else
m_frameAnimator->stop();
emit runningChanged(m_running);
}
void QPhysicsWorld::setForceDebugDraw(bool forceDebugDraw)
{
if (m_forceDebugDraw == forceDebugDraw)
return;
m_forceDebugDraw = forceDebugDraw;
if (!m_forceDebugDraw)
disableDebugDraw();
else
updateDebugDraw();
emit forceDebugDrawChanged(m_forceDebugDraw);
}
QQuick3DNode *QPhysicsWorld::viewport() const
{
return m_viewport;
}
void QPhysicsWorld::setHasIndividualDebugDraw()
{
m_hasIndividualDebugDraw = true;
}
void QPhysicsWorld::setViewport(QQuick3DNode *viewport)
{
if (m_viewport == viewport)
return;
m_viewport = viewport;
// TODO: test this
for (auto material : std::as_const(m_debugMaterials))
delete material;
m_debugMaterials.clear();
for (auto &holder : m_collisionShapeDebugModels) {
holder.releaseMeshPointer();
delete holder.model;
}
m_collisionShapeDebugModels.clear();
emit viewportChanged(m_viewport);
}
void QPhysicsWorld::setMinimumTimestep(float minTimestep)
{
if (qFuzzyCompare(m_minTimestep, minTimestep))
return;
if (!qIsFinite(minTimestep)) {
qWarning("Minimum timestep must be finite, ignoring");
return;
}
if (minTimestep > m_maxTimestep) {
qWarning("Minimum timestep greater than maximum timestep, value clamped");
minTimestep = qMin(minTimestep, m_maxTimestep);
}
if (minTimestep < 0.f) {
qWarning("Minimum timestep less than zero, value clamped");
minTimestep = qMax(minTimestep, 0.f);
}
if (qFuzzyCompare(m_minTimestep, minTimestep))
return;
m_minTimestep = minTimestep;
emit minimumTimestepChanged(m_minTimestep);
}
void QPhysicsWorld::setMaximumTimestep(float maxTimestep)
{
if (qFuzzyCompare(m_maxTimestep, maxTimestep))
return;
if (!qIsFinite(maxTimestep)) {
qWarning("Maximum timestep must be finite, ignoring");
return;
}
if (maxTimestep < 0.f) {
qWarning("Maximum timestep less than zero, value clamped");
maxTimestep = qMax(maxTimestep, 0.f);
}
if (qFuzzyCompare(m_maxTimestep, maxTimestep))
return;
m_maxTimestep = maxTimestep;
emit maximumTimestepChanged(maxTimestep);
}
void QPhysicsWorld::setupDebugMaterials(QQuick3DNode *sceneNode)
{
if (!m_debugMaterials.isEmpty())
return;
const int lineWidth = m_inDesignStudio ? 1 : 3;
// These colors match the indices of DebugDrawBodyType enum
for (auto color : { QColorConstants::Svg::chartreuse, QColorConstants::Svg::cyan,
QColorConstants::Svg::lightsalmon, QColorConstants::Svg::red,
QColorConstants::Svg::blueviolet, QColorConstants::Svg::black }) {
auto debugMaterial = new QQuick3DPrincipledMaterial();
debugMaterial->setLineWidth(lineWidth);
debugMaterial->setParentItem(sceneNode);
debugMaterial->setParent(sceneNode);
debugMaterial->setBaseColor(color);
debugMaterial->setLighting(QQuick3DPrincipledMaterial::NoLighting);
debugMaterial->setCullMode(QQuick3DMaterial::NoCulling);
m_debugMaterials.push_back(debugMaterial);
}
}
void QPhysicsWorld::updateDebugDraw()
{
if (!(m_forceDebugDraw || m_hasIndividualDebugDraw)) {
// Nothing to draw, trash all previous models (if any) and return
for (auto &holder : m_collisionShapeDebugModels) {
holder.releaseMeshPointer();
delete holder.model;
}
m_collisionShapeDebugModels.clear();
return;
}
// Use scene node if no viewport has been specified
auto sceneNode = m_viewport ? m_viewport : m_scene;
if (sceneNode == nullptr)
return;
setupDebugMaterials(sceneNode);
m_hasIndividualDebugDraw = false;
// Store the collision shapes we have now so we can clear out the removed ones
QSet<QPair<QAbstractCollisionShape *, QAbstractPhysXNode *>> currentCollisionShapes;
currentCollisionShapes.reserve(m_collisionShapeDebugModels.size());
for (QAbstractPhysXNode *node : std::as_const(m_physXBodies)) {
// A node deleted from a report earlier in this frame keeps its backend
// until the next one takes it out.
if (!node->frontendNode || !node->debugGeometryCapability())
continue;
const auto &collisionShapes = node->frontendNode->getCollisionShapesList();
const int materialIdx = static_cast<int>(node->getDebugDrawBodyType());
const int length = collisionShapes.length();
for (int idx = 0; idx < length; idx++) {
const auto collisionShape = collisionShapes[idx];
if (!m_forceDebugDraw && !collisionShape->enableDebugDraw())
continue;
DebugModelHolder &holder =
m_collisionShapeDebugModels[std::make_pair(collisionShape, node)];
auto &model = holder.model;
currentCollisionShapes.insert(std::make_pair(collisionShape, node));
m_hasIndividualDebugDraw =
m_hasIndividualDebugDraw || collisionShape->enableDebugDraw();
// Create/Update debug view infrastructure
if (!model) {
model = new QQuick3DModel();
model->setParentItem(sceneNode);
model->setParent(sceneNode);
model->setCastsShadows(false);
model->setReceivesShadows(false);
model->setCastsReflections(false);
}
model->setVisible(true);
{ // update or set material
auto material = m_debugMaterials[materialIdx];
QQmlListReference materialsRef(model, "materials");
if (materialsRef.count() == 0 || materialsRef.at(0) != material) {
materialsRef.clear();
materialsRef.append(material);
}
}
// Special handling of CharacterController since it has collision shapes,
// but not PhysX shapes
if (qobject_cast<QCharacterController *>(node->frontendNode)) {
QCapsuleShape *capsuleShape = qobject_cast<QCapsuleShape *>(collisionShape);
if (!capsuleShape)
continue;
const float radius = capsuleShape->diameter() * 0.5;
const float halfHeight = capsuleShape->height() * 0.5;
if (!qFuzzyCompare(radius, holder.radius())
|| !qFuzzyCompare(halfHeight, holder.halfHeight())) {
auto geom = QDebugDrawHelper::generateCapsuleGeometry(radius, halfHeight);
geom->setParent(model);
model->setGeometry(geom);
holder.setRadius(radius);
holder.setHalfHeight(halfHeight);
}
model->setPosition(node->frontendNode->scenePosition());
model->setRotation(node->frontendNode->sceneRotation()
* QQuaternion::fromEulerAngles(0, 0, 90));
continue;
}
if (node->shapes.length() < length)
continue;
const auto physXShape = node->shapes[idx];
auto localPose = physXShape->getLocalPose();
switch (physXShape->getGeometryType()) {
case physx::PxGeometryType::eBOX: {
physx::PxBoxGeometry boxGeometry;
physXShape->getBoxGeometry(boxGeometry);
const auto &halfExtentsOld = holder.halfExtents();
const auto halfExtents = QPhysicsUtils::toQtType(boxGeometry.halfExtents);
if (!qFuzzyCompare(halfExtentsOld, halfExtents)) {
auto geom = QDebugDrawHelper::generateBoxGeometry(halfExtents);
geom->setParent(model);
model->setGeometry(geom);
holder.setHalfExtents(halfExtents);
}
}
break;
case physx::PxGeometryType::eSPHERE: {
physx::PxSphereGeometry sphereGeometry;
physXShape->getSphereGeometry(sphereGeometry);
const float radius = holder.radius();
if (!qFuzzyCompare(sphereGeometry.radius, radius)) {
auto geom = QDebugDrawHelper::generateSphereGeometry(sphereGeometry.radius);
geom->setParent(model);
model->setGeometry(geom);
holder.setRadius(sphereGeometry.radius);
}
}
break;
case physx::PxGeometryType::eCAPSULE: {
physx::PxCapsuleGeometry capsuleGeometry;
physXShape->getCapsuleGeometry(capsuleGeometry);
const float radius = holder.radius();
const float halfHeight = holder.halfHeight();
if (!qFuzzyCompare(capsuleGeometry.radius, radius)
|| !qFuzzyCompare(capsuleGeometry.halfHeight, halfHeight)) {
auto geom = QDebugDrawHelper::generateCapsuleGeometry(
capsuleGeometry.radius, capsuleGeometry.halfHeight);
geom->setParent(model);
model->setGeometry(geom);
holder.setRadius(capsuleGeometry.radius);
holder.setHalfHeight(capsuleGeometry.halfHeight);
}
}
break;
case physx::PxGeometryType::ePLANE:{
physx::PxPlaneGeometry planeGeometry;
physXShape->getPlaneGeometry(planeGeometry);
// Special rotation
const QQuaternion rotation =
QPhysicsUtils::kMinus90YawRotation * QPhysicsUtils::toQtType(localPose.q);
localPose = physx::PxTransform(localPose.p, QPhysicsUtils::toPhysXType(rotation));
if (model->geometry() == nullptr) {
auto geom = QDebugDrawHelper::generatePlaneGeometry();
geom->setParent(model);
model->setGeometry(geom);
}
}
break;
// For heightfield, convex mesh and triangle mesh we increase its reference count
// to make sure it does not get dereferenced and deleted so that the new mesh will
// have another memory address so we know when it has changed.
case physx::PxGeometryType::eHEIGHTFIELD: {
physx::PxHeightFieldGeometry heightFieldGeometry;
bool success = physXShape->getHeightFieldGeometry(heightFieldGeometry);
Q_ASSERT(success);
const float heightScale = holder.heightScale();
const float rowScale = holder.rowScale();
const float columnScale = holder.columnScale();
if (auto heightField = holder.getHeightField();
heightField && heightField != heightFieldGeometry.heightField) {
heightField->release();
holder.setHeightField(nullptr);
}
if (!qFuzzyCompare(heightFieldGeometry.heightScale, heightScale)
|| !qFuzzyCompare(heightFieldGeometry.rowScale, rowScale)
|| !qFuzzyCompare(heightFieldGeometry.columnScale, columnScale)
|| !holder.getHeightField()) {
if (!holder.getHeightField()) {
heightFieldGeometry.heightField->acquireReference();
holder.setHeightField(heightFieldGeometry.heightField);
}
auto geom = QDebugDrawHelper::generateHeightFieldGeometry(
heightFieldGeometry.heightField, heightFieldGeometry.heightScale,
heightFieldGeometry.rowScale, heightFieldGeometry.columnScale);
geom->setParent(model);
model->setGeometry(geom);
holder.setHeightScale(heightFieldGeometry.heightScale);
holder.setRowScale(heightFieldGeometry.rowScale);
holder.setColumnScale(heightFieldGeometry.columnScale);
}
}
break;
case physx::PxGeometryType::eCONVEXMESH: {
physx::PxConvexMeshGeometry convexMeshGeometry;
const bool success = physXShape->getConvexMeshGeometry(convexMeshGeometry);
Q_ASSERT(success);
const auto rotation = convexMeshGeometry.scale.rotation * localPose.q;
localPose = physx::PxTransform(localPose.p, rotation);
model->setScale(QPhysicsUtils::toQtType(convexMeshGeometry.scale.scale));
if (auto convexMesh = holder.getConvexMesh();
convexMesh && convexMesh != convexMeshGeometry.convexMesh) {
convexMesh->release();
holder.setConvexMesh(nullptr);
}
if (!model->geometry() || !holder.getConvexMesh()) {
if (!holder.getConvexMesh()) {
convexMeshGeometry.convexMesh->acquireReference();
holder.setConvexMesh(convexMeshGeometry.convexMesh);
}
auto geom = QDebugDrawHelper::generateConvexMeshGeometry(
convexMeshGeometry.convexMesh);
geom->setParent(model);
model->setGeometry(geom);
}
}
break;
case physx::PxGeometryType::eTRIANGLEMESH: {
physx::PxTriangleMeshGeometry triangleMeshGeometry;
const bool success = physXShape->getTriangleMeshGeometry(triangleMeshGeometry);
Q_ASSERT(success);
const auto rotation = triangleMeshGeometry.scale.rotation * localPose.q;
localPose = physx::PxTransform(localPose.p, rotation);
model->setScale(QPhysicsUtils::toQtType(triangleMeshGeometry.scale.scale));
if (auto triangleMesh = holder.getTriangleMesh();
triangleMesh && triangleMesh != triangleMeshGeometry.triangleMesh) {
triangleMesh->release();
holder.setTriangleMesh(nullptr);
}
if (!model->geometry() || !holder.getTriangleMesh()) {
if (!holder.getTriangleMesh()) {
triangleMeshGeometry.triangleMesh->acquireReference();
holder.setTriangleMesh(triangleMeshGeometry.triangleMesh);
}
auto geom = QDebugDrawHelper::generateTriangleMeshGeometry(
triangleMeshGeometry.triangleMesh);
geom->setParent(model);
model->setGeometry(geom);
}
}
break;
case physx::PxGeometryType::eINVALID:
case physx::PxGeometryType::eGEOMETRY_COUNT:
// should not happen
Q_UNREACHABLE();
}
auto globalPose = node->getGlobalPose();
auto finalPose = globalPose.transform(localPose);
model->setRotation(QPhysicsUtils::toQtType(finalPose.q));
model->setPosition(QPhysicsUtils::toQtType(finalPose.p));
}
}
// Remove old collision shapes
m_collisionShapeDebugModels.removeIf(
[&](QHash<QPair<QAbstractCollisionShape *, QAbstractPhysXNode *>,
DebugModelHolder>::iterator it) {
if (!currentCollisionShapes.contains(it.key())) {
auto holder = it.value();
holder.releaseMeshPointer();
if (holder.model)
delete holder.model;
return true;
}
return false;
});
}
static void collectPhysicsNodes(QQuick3DObject *node, QList<QAbstractPhysicsNode *> &nodes)
{
if (auto shape = qobject_cast<QAbstractPhysicsNode *>(node)) {
nodes.push_back(shape);
return;
}
auto childItems = node->childItems();
for (QQuick3DObject *child : std::as_const(childItems))
collectPhysicsNodes(child, nodes);
}
void QPhysicsWorld::updateDebugDrawDesignStudio()
{
// Use scene node if no viewport has been specified
auto sceneNode = m_viewport ? m_viewport : m_scene;
if (sceneNode == nullptr)
return;
setupDebugMaterials(sceneNode);
// Store the collision shapes we have now so we can clear out the removed ones
QSet<QPair<QAbstractCollisionShape *, QAbstractPhysicsNode *>> currentCollisionShapes;
currentCollisionShapes.reserve(m_collisionShapeDebugModels.size());
QList<QAbstractPhysicsNode *> activePhysicsNodes;
activePhysicsNodes.reserve(m_collisionShapeDebugModels.size());
collectPhysicsNodes(m_scene, activePhysicsNodes);
for (QAbstractPhysicsNode *node : std::as_const(activePhysicsNodes)) {
const auto &collisionShapes = node->getCollisionShapesList();
const int materialIdx = 0; // Just take first material
const int length = collisionShapes.length();
const bool isCharacterController = qobject_cast<QCharacterController *>(node) != nullptr;
for (int idx = 0; idx < length; idx++) {
QAbstractCollisionShape *collisionShape = collisionShapes[idx];
DebugModelHolder &holder =
m_DesignStudioDebugModels[std::make_pair(collisionShape, node)];
auto &model = holder.model;
currentCollisionShapes.insert(std::make_pair(collisionShape, node));
m_hasIndividualDebugDraw =
m_hasIndividualDebugDraw || collisionShape->enableDebugDraw();
// Create/Update debug view infrastructure
{
// Hack: we have to delete the model every frame so it shows up in QDS
// whenever the code is updated, not sure why ¯\_(?)_/¯
delete model;
model = new QQuick3DModel();
model->setParentItem(sceneNode);
model->setParent(sceneNode);
model->setCastsShadows(false);
model->setReceivesShadows(false);
model->setCastsReflections(false);
}
const bool hasGeometry = holder.geometry != nullptr;
QVector3D scenePosition = collisionShape->scenePosition();
QQuaternion sceneRotation = collisionShape->sceneRotation();
QQuick3DGeometry *newGeometry = nullptr;
if (isCharacterController)
sceneRotation = sceneRotation * QQuaternion::fromEulerAngles(QVector3D(0, 0, 90));
{ // update or set material
auto material = m_debugMaterials[materialIdx];
QQmlListReference materialsRef(model, "materials");
if (materialsRef.count() == 0 || materialsRef.at(0) != material) {
materialsRef.clear();
materialsRef.append(material);
}
}
if (auto shape = qobject_cast<QBoxShape *>(collisionShape)) {
const auto &halfExtentsOld = holder.halfExtents();
const auto halfExtents = shape->sceneScale() * shape->extents() * 0.5f;
if (!qFuzzyCompare(halfExtentsOld, halfExtents) || !hasGeometry) {
newGeometry = QDebugDrawHelper::generateBoxGeometry(halfExtents);
holder.setHalfExtents(halfExtents);
}
} else if (auto shape = qobject_cast<QSphereShape *>(collisionShape)) {
const float radiusOld = holder.radius();
const float radius = shape->sceneScale().x() * shape->diameter() * 0.5f;
if (!qFuzzyCompare(radiusOld, radius) || !hasGeometry) {
newGeometry = QDebugDrawHelper::generateSphereGeometry(radius);
holder.setRadius(radius);
}
} else if (auto shape = qobject_cast<QCapsuleShape *>(collisionShape)) {
const float radiusOld = holder.radius();
const float halfHeightOld = holder.halfHeight();
const float radius = shape->sceneScale().y() * shape->diameter() * 0.5f;
const float halfHeight = shape->sceneScale().x() * shape->height() * 0.5f;
if ((!qFuzzyCompare(radiusOld, radius) || !qFuzzyCompare(halfHeightOld, halfHeight))
|| !hasGeometry) {
newGeometry = QDebugDrawHelper::generateCapsuleGeometry(radius, halfHeight);
holder.setRadius(radius);
holder.setHalfHeight(halfHeight);
}
} else if (qobject_cast<QPlaneShape *>(collisionShape)) {
if (!hasGeometry)
newGeometry = QDebugDrawHelper::generatePlaneGeometry();
} else if (auto shape = qobject_cast<QHeightFieldShape *>(collisionShape)) {
physx::PxHeightFieldGeometry *heightFieldGeometry =
static_cast<physx::PxHeightFieldGeometry *>(shape->getPhysXGeometry());
const float heightScale = holder.heightScale();
const float rowScale = holder.rowScale();
const float columnScale = holder.columnScale();
scenePosition += shape->hfOffset();
if (!heightFieldGeometry) {
qWarning() << "Could not get height field";
} else if (!qFuzzyCompare(heightFieldGeometry->heightScale, heightScale)
|| !qFuzzyCompare(heightFieldGeometry->rowScale, rowScale)
|| !qFuzzyCompare(heightFieldGeometry->columnScale, columnScale)
|| !hasGeometry) {
newGeometry = QDebugDrawHelper::generateHeightFieldGeometry(
heightFieldGeometry->heightField, heightFieldGeometry->heightScale,
heightFieldGeometry->rowScale, heightFieldGeometry->columnScale);
holder.setHeightScale(heightFieldGeometry->heightScale);
holder.setRowScale(heightFieldGeometry->rowScale);
holder.setColumnScale(heightFieldGeometry->columnScale);
}
} else if (auto shape = qobject_cast<QConvexMeshShape *>(collisionShape)) {
auto convexMeshGeometry =
static_cast<physx::PxConvexMeshGeometry *>(shape->getPhysXGeometry());
if (!convexMeshGeometry) {
qWarning() << "Could not get convex mesh";
} else {
model->setScale(QPhysicsUtils::toQtType(convexMeshGeometry->scale.scale));
if (!hasGeometry) {
newGeometry = QDebugDrawHelper::generateConvexMeshGeometry(
convexMeshGeometry->convexMesh);
}
}
} else if (auto shape = qobject_cast<QTriangleMeshShape *>(collisionShape)) {
physx::PxTriangleMeshGeometry *triangleMeshGeometry =
static_cast<physx::PxTriangleMeshGeometry *>(shape->getPhysXGeometry());
if (!triangleMeshGeometry) {
qWarning() << "Could not get triangle mesh";
} else {
model->setScale(QPhysicsUtils::toQtType(triangleMeshGeometry->scale.scale));
if (!hasGeometry) {
newGeometry = QDebugDrawHelper::generateTriangleMeshGeometry(
triangleMeshGeometry->triangleMesh);
}
}
}
if (newGeometry) {
delete holder.geometry;
holder.geometry = newGeometry;
}
model->setGeometry(holder.geometry);
model->setVisible(true);
model->setRotation(sceneRotation);
model->setPosition(scenePosition);
}
}
// Remove old debug models
m_DesignStudioDebugModels.removeIf(
[&](QHash<QPair<QAbstractCollisionShape *, QAbstractPhysicsNode *>,
DebugModelHolder>::iterator it) {
if (!currentCollisionShapes.contains(it.key())) {
auto holder = it.value();
holder.releaseMeshPointer();
if (holder.model) {
delete holder.geometry;
delete holder.model;
}
return true;
}
return false;
});
}
void QPhysicsWorld::disableDebugDraw()
{
m_hasIndividualDebugDraw = false;
for (QAbstractPhysXNode *body : std::as_const(m_physXBodies)) {
if (!body->frontendNode)
continue;
const auto &collisionShapes = body->frontendNode->getCollisionShapesList();
const int length = collisionShapes.length();
for (int idx = 0; idx < length; idx++) {
const auto collisionShape = collisionShapes[idx];
if (collisionShape->enableDebugDraw()) {
m_hasIndividualDebugDraw = true;
return;
}
}
}
}
void QPhysicsWorld::setEnableCCD(bool enableCCD)
{
if (m_enableCCD == enableCCD)
return;
if (m_physicsInitialized) {
qWarning()
<< "Warning: Changing 'enableCCD' after physics is initialized will have no effect";
return;
}
m_enableCCD = enableCCD;
emit enableCCDChanged(m_enableCCD);
}
void QPhysicsWorld::setTypicalLength(float typicalLength)
{
if (qFuzzyCompare(typicalLength, m_typicalLength))
return;
if (!qIsFinite(typicalLength) || typicalLength <= 0.f) {
qWarning() << "Warning: 'typicalLength' value less than zero, ignored";
return;
}
if (m_physicsInitialized) {
qWarning() << "Warning: Changing 'typicalLength' after physics is initialized will have "
"no effect";
return;
}
m_typicalLength = typicalLength;
emit typicalLengthChanged(typicalLength);
}
void QPhysicsWorld::setTypicalSpeed(float typicalSpeed)
{
if (qFuzzyCompare(typicalSpeed, m_typicalSpeed))
return;
if (!qIsFinite(typicalSpeed) || typicalSpeed <= 0.f) {
qWarning() << "Warning: 'typicalSpeed' must be finite and greater than zero, ignored";
return;
}
if (m_physicsInitialized) {
qWarning() << "Warning: Changing 'typicalSpeed' after physics is initialized will have "
"no effect";
return;
}
m_typicalSpeed = typicalSpeed;
emit typicalSpeedChanged(typicalSpeed);
}
float QPhysicsWorld::defaultDensity() const
{
return m_defaultDensity;
}
float QPhysicsWorld::minimumTimestep() const
{
return m_minTimestep;
}
float QPhysicsWorld::maximumTimestep() const
{
return m_maxTimestep;
}
void QPhysicsWorld::setDefaultDensity(float defaultDensity)
{
defaultDensity = qBound(0.0000001f, defaultDensity, PX_MAX_F32);
if (qFuzzyCompare(m_defaultDensity, defaultDensity))
return;
m_defaultDensity = defaultDensity;
// Go through all dynamic rigid bodies and update the default density
for (QAbstractPhysXNode *body : std::as_const(m_physXBodies)) {
if (body->frontendNode)
body->updateDefaultDensity(m_defaultDensity);
}
emit defaultDensityChanged(defaultDensity);
}
// Remove physics world items that no longer exist
void QPhysicsWorld::cleanupRemovedNodes()
{
m_physXBodies.removeIf([this](QAbstractPhysXNode *body) {
return body->cleanupIfRemoved(m_physx);
});
m_removedPhysicsNodes.clear();
}
// Tell the triggers which nodes have had their shapes replaced, and drop what
// the reports that followed the last such replacement did not mention
void QPhysicsWorld::invalidateTriggerOverlaps(QSpan<QAbstractPhysXNode *const> rebuiltBodies)
{
for (QAbstractPhysXNode *body : std::as_const(m_physXBodies)) {
auto *trigger = qobject_cast<QTriggerBody *>(body->frontendNode);
if (!trigger)
continue;
for (QAbstractPhysXNode *rebuilt : rebuiltBodies) {
// The rebuilt nodes are held as backends, which outlive the frame,
// since syncing the frame can run a handler that deletes a node
// that was rebuilt earlier in it. deregisterNode() takes the
// frontend off the backend of whatever is deleted.
if (rebuilt->frontendNode)
trigger->invalidateOverlaps(rebuilt->frontendNode);
}
}
m_triggerOverlapsInvalidated = true;
}
void QPhysicsWorld::dropUnreportedTriggerOverlaps()
{
// Nothing is waiting to be reported again unless shapes were replaced, so
// this stays off the frame of a scene that never rebuilds any.
if (!m_triggerOverlapsInvalidated)
return;
m_triggerOverlapsInvalidated = false;
// A body reported as having left can be deleted from the handler, and so can
// a trigger that has not been reached yet. deregisterNode() takes the
// frontend off whatever is deleted, so what still has one here is what
// is left.
for (QAbstractPhysXNode *body : std::as_const(m_physXBodies)) {
if (auto *trigger = qobject_cast<QTriggerBody *>(body->frontendNode))
trigger->dropUnreportedOverlaps();
}
}
void QPhysicsWorld::cleanupRemovedJoints()
{
for (physx::PxJoint *joint : m_removedJoints) {
if (joint)
joint->release();
}
m_removedJoints.clear();
}
void QPhysicsWorld::initPhysics()
{
Q_ASSERT(!m_physicsInitialized);
const unsigned int numThreads = m_numThreads >= 0 ? m_numThreads : qMax(0, QThread::idealThreadCount());
m_physx->createScene(m_typicalLength, m_typicalSpeed, m_gravity, this, numThreads);
m_frameAnimator->start();
m_physicsInitialized = true;
}
void QPhysicsWorld::simulateFrame()
{
constexpr double MILLIONTH = 0.000001;
constexpr double THOUSANDTH = 0.001;
if (m_inDesignStudio) {
frameFinishedDesignStudio();
return;
}
if (!m_physx->isRunning) {
m_timer.start();
m_physx->isRunning = true;
const double minTimestepSecs = m_minTimestep * 0.001;
m_physx->scene->simulate(minTimestepSecs);
m_currTimeStep = minTimestepSecs;
return;
}
// Frame not ready yet
if (!m_frameFetched && !m_physx->scene->checkResults()) {
return;
}
// Frame ready, fetch and finish it
if (!m_frameFetched) {
m_physx->scene->fetchResults(true);
frameFinished(m_currTimeStep);
m_frameFetched = true;
if (Q_UNLIKELY(!qtPhysicsTimingsFile.isEmpty())) {
const double deltaMS = m_timer.nsecsElapsed() * MILLIONTH;
m_frameTimings.append(deltaMS);
}
}
// Assuming: 0 <= minTimestep <= maxTimestep
const double deltaMS = m_timer.nsecsElapsed() * MILLIONTH;
if (deltaMS < m_minTimestep)
return;
const double deltaSecs = qMin<double>(deltaMS, m_maxTimestep) * THOUSANDTH;
m_timer.restart();
m_physx->scene->simulate(deltaSecs);
m_frameFetched = false;
m_currTimeStep = deltaSecs;
}
void QPhysicsWorld::frameFinished(float deltaTime)
{
matchOrphanNodes();
matchOrphanJoints();
// One round of reports has been fetched since the shapes rebuilt below were
// replaced, so whatever it did not mention is no longer overlapping. Kept
// ahead of cleanupRemovedNodes(), like the contact callbacks, since a body
// reported as having left can be deleted from the handler.
dropUnreportedTriggerOverlaps();
emitContactCallbacks();
cleanupRemovedNodes();
cleanupRemovedJoints();
for (auto *node : std::as_const(m_newPhysicsNodes)) {
auto *body = node->createPhysXBackend();
body->init(this, m_physx);
m_physXBodies.push_back(body);
}
m_newPhysicsNodes.clear();
QHash<QQuick3DNode *, QMatrix4x4> transformCache;
QVarLengthArray<QAbstractPhysXNode *, 8> rebuiltBodies;
// TODO: Use dirty flag/dirty list to avoid redoing things that didn't change
for (auto *physXBody : std::as_const(m_physXBodies)) {
// Syncing runs a node's bindings, and a character controller reports
// what it hits from here, so one can be deleted while this loop runs.
if (!physXBody->frontendNode)
continue;
physXBody->markDirtyShapes();
const bool wasDirty = physXBody->shapesDirty();
physXBody->rebuildDirtyShapes(this, m_physx);
// Rebuilding reports too, when it has to force a body kinematic.
if (!physXBody->frontendNode)
continue;
// Dirty before and clean after is the backend having replaced the shapes
// of the node, which the triggers holding them need to hear about.
if (wasDirty && !physXBody->shapesDirty())
rebuiltBodies.append(physXBody);
physXBody->updateFilters();
// Sync the physics world and the scene
physXBody->sync(deltaTime, transformCache);
}
if (!rebuiltBodies.isEmpty())
invalidateTriggerOverlaps(rebuiltBodies);
for (QPhysicsJoint *joint : std::as_const(m_joints)) {
joint->updatePhysXBackend();
}
updateDebugDraw();
emit frameDone(deltaTime * 1000);
}
void QPhysicsWorld::frameFinishedDesignStudio()
{
// Note sure if this is needed but do it anyway
matchOrphanNodes();
matchOrphanJoints();
emitContactCallbacks();
cleanupRemovedNodes();
// Ignore new physics nodes, we find them from the scene node anyway
m_newPhysicsNodes.clear();
updateDebugDrawDesignStudio();
}
QPhysicsWorld *QPhysicsWorld::getWorld(QQuick3DNode *node)
{
for (QPhysicsWorld *world : std::as_const(worldManager.worlds)) {
if (!world->m_scene) {
continue;
}
QQuick3DNode *nodeCurr = node;
// Maybe pointless but check starting node
if (nodeCurr == world->m_scene)
return world;
while (nodeCurr->parentNode()) {
nodeCurr = nodeCurr->parentNode();
if (nodeCurr == world->m_scene)
return world;
}
}
return nullptr;
}
QPhysicsWorld *QPhysicsWorld::getWorld(QPhysicsJoint *joint)
{
for (QPhysicsWorld *world : worldManager.worlds) {
if (!world->m_scene) {
continue;
}
QObject *nodeCurr = joint;
while (nodeCurr->parent()) {
nodeCurr = nodeCurr->parent();
if (nodeCurr == world->m_scene) {
return world;
} else if (auto view3d = qobject_cast<QQuick3DViewport *>(nodeCurr);
view3d && view3d->scene() == world->m_scene) {
// HACK? if the parent is a view3d, check against its "implicit" scene
return world;
}
}
}
return nullptr;
}
void QPhysicsWorld::matchOrphanNodes()
{
// FIXME: does this need thread safety?
if (worldManager.orphanNodes.isEmpty())
return;
qsizetype numNodes = worldManager.orphanNodes.length();
qsizetype idx = 0;
while (idx < numNodes) {
auto node = worldManager.orphanNodes[idx];
auto world = getWorld(node);
if (world == this) {
world->m_newPhysicsNodes.push_back(node);
// swap-erase
worldManager.orphanNodes.swapItemsAt(idx, numNodes - 1);
worldManager.orphanNodes.pop_back();
numNodes--;
} else {
idx++;
}
}
}
void QPhysicsWorld::matchOrphanJoints()
{
if (worldManager.orphanJoints.isEmpty())
return;
qsizetype numNodes = worldManager.orphanJoints.length();
qsizetype idx = 0;
while (idx < numNodes) {
auto node = worldManager.orphanJoints[idx];
auto world = getWorld(node);
if (world == this) {
world->m_joints.push_back(node);
// swap-erase
worldManager.orphanJoints.swapItemsAt(idx, numNodes - 1);
worldManager.orphanJoints.pop_back();
numNodes--;
} else {
idx++;
}
}
}
void QPhysicsWorld::findPhysicsNodes()
{
// This method finds the physics nodes inside the scene pointed to by the
// scene property. This method is necessary to run whenever the scene
// property is changed.
if (m_scene == nullptr)
return;
// Recursively go through all children and add all QAbstractPhysicsNode's
QList<QQuick3DObject *> children = m_scene->childItems();
while (!children.empty()) {
auto child = children.takeFirst();
if (auto converted = qobject_cast<QAbstractPhysicsNode *>(child); converted != nullptr) {
// This should never happen but check anyway.
if (converted->m_backendObject != nullptr) {
qWarning() << "Warning: physics node already associated with a backend node.";
continue;
}
m_newPhysicsNodes.push_back(converted);
worldManager.orphanNodes.removeAll(converted); // No longer orphan
}
children.append(child->childItems());
}
}
void QPhysicsWorld::emitContactCallbacks()
{
for (const QPhysicsWorld::BodyContact &contact : std::as_const(m_registeredContacts)) {
if (m_removedPhysicsNodes.contains(contact.sender)
|| m_removedPhysicsNodes.contains(contact.receiver))
continue;
contact.receiver->registerContact(contact.sender, contact.positions, contact.impulses,
contact.normals);
}
m_registeredContacts.clear();
}
physx::PxPhysics *QPhysicsWorld::getPhysics()
{
return StaticPhysXObjects::getReference().physics;
}
physx::PxCooking *QPhysicsWorld::getCooking()
{
return StaticPhysXObjects::getReference().cooking;
}
physx::PxControllerManager *QPhysicsWorld::controllerManager()
{
if (m_physx->scene && !m_physx->controllerManager) {
m_physx->controllerManager = PxCreateControllerManager(*m_physx->scene);
qCDebug(lcQuick3dPhysics) << "Created controller manager" << m_physx->controllerManager;
}
return m_physx->controllerManager;
}
QQuick3DNode *QPhysicsWorld::scene() const
{
return m_scene;
}
void QPhysicsWorld::setScene(QQuick3DNode *newScene)
{
if (m_scene == newScene)
return;
m_scene = newScene;
// Delete all nodes since they are associated with the previous scene. One
// deleted from a report earlier in this frame has nothing left to
// deregister.
for (auto body : std::as_const(m_physXBodies)) {
if (body->frontendNode)
deregisterNode(body->frontendNode);
}
// Check if scene is already used by another world
bool sceneOK = true;
for (QPhysicsWorld *world : std::as_const(worldManager.worlds)) {
if (world != this && world->scene() == newScene) {
sceneOK = false;
qWarning() << "Warning: scene already associated with physics world";
}
}
if (sceneOK)
findPhysicsNodes();
emit sceneChanged();
}
int QPhysicsWorld::numThreads() const
{
return m_numThreads;
}
void QPhysicsWorld::setNumThreads(int newNumThreads)
{
newNumThreads = qMin(newNumThreads, 256);
if (m_numThreads == newNumThreads)
return;
m_numThreads = newNumThreads;
emit numThreadsChanged();
}
bool QPhysicsWorld::reportKinematicKinematicCollisions() const
{
return m_reportKinematicKinematicCollisions;
}
void QPhysicsWorld::setReportKinematicKinematicCollisions(
bool newReportKinematicKinematicCollisions)
{
if (m_reportKinematicKinematicCollisions == newReportKinematicKinematicCollisions)
return;
m_reportKinematicKinematicCollisions = newReportKinematicKinematicCollisions;
emit reportKinematicKinematicCollisionsChanged();
}
bool QPhysicsWorld::reportStaticKinematicCollisions() const
{
return m_reportStaticKinematicCollisions;
}
void QPhysicsWorld::setReportStaticKinematicCollisions(bool newReportStaticKinematicCollisions)
{
if (m_reportStaticKinematicCollisions == newReportStaticKinematicCollisions)
return;
m_reportStaticKinematicCollisions = newReportStaticKinematicCollisions;
emit reportStaticKinematicCollisionsChanged();
}
QPhysicsWorld::QueryStructure QPhysicsWorld::staticQueryStructure() const
{
return m_staticQueryStructure;
}
void QPhysicsWorld::setStaticQueryStructure(QueryStructure newStaticQueryStructure)
{
if (m_staticQueryStructure == newStaticQueryStructure)
return;
if (newStaticQueryStructure == QueryStructure::NoStructure) {
qWarning()
<< "Warning: The QueryStructure::NoStructure is not supported for staticQueryStructure. Available options: [StaticTree, DynamicTree]";
return;
}
if (m_physicsInitialized) {
qWarning()
<< "Warning: Changing 'staticQueryStructure' after physics is initialized will have no effect";
return;
}
m_staticQueryStructure = newStaticQueryStructure;
emit staticQueryStructureChanged();
}
QPhysicsWorld::QueryStructure QPhysicsWorld::dynamicQueryStructure() const
{
return m_dynamicQueryStructure;
}
void QPhysicsWorld::setDynamicQueryStructure(QueryStructure newDynamicQueryStructure)
{
if (m_dynamicQueryStructure == newDynamicQueryStructure)
return;
if (m_physicsInitialized) {
qWarning()
<< "Warning: Changing 'dynamicQueryStructure' after physics is initialized will have no effect";
return;
}
m_dynamicQueryStructure = newDynamicQueryStructure;
emit dynamicQueryStructureChanged();
}
QT_END_NAMESPACE
#include "qphysicsworld.moc"