Revision control

- /****************************************************************************
- **
- ** Copyright (C) 2017 The Qt Company Ltd and/or its subsidiary(-ies).
- ** Contact: https://www.qt.io/licensing/
- **
- ** This file is part of the Qt3D module of the Qt Toolkit.
- **
- ** $QT_BEGIN_LICENSE:LGPL$
- ** Commercial License Usage
- ** Licensees holding valid commercial Qt licenses may use this file in
- ** accordance with the commercial license agreement provided with the
- ** Software or, alternatively, in accordance with the terms contained in
- ** a written agreement between you and The Qt Company. For licensing terms
- ** and conditions see https://www.qt.io/terms-conditions. For further
- ** information use the contact form at https://www.qt.io/contact-us.
- **
- ** GNU Lesser General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU Lesser
- ** General Public License version 3 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.LGPL3 included in the
- ** packaging of this file. Please review the following information to
- ** ensure the GNU Lesser General Public License version 3 requirements
- ** will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
- **
- ** GNU General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU
- ** General Public License version 2.0 or (at your option) the GNU General
- ** Public license version 3 or any later version approved by the KDE Free
- ** Qt Foundation. The licenses are as published by the Free Software
- ** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
- ** included in the packaging of this file. Please review the following
- ** information to ensure the GNU General Public License requirements will
- ** be met: https://www.gnu.org/licenses/gpl-2.0.html and
- ** https://www.gnu.org/licenses/gpl-3.0.html.
- **
- ** $QT_END_LICENSE$
- **
- ****************************************************************************/
+ // Copyright (C) 2017 The Qt Company Ltd and/or its subsidiary(-ies).
+ // SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
#include <QtTest/qtest.h>
#include <QtCore/QScopedPointer>
#include <QtCore/private/qfactoryloader_p.h>
#include <Qt3DCore/qattribute.h>
#include <Qt3DCore/qgeometry.h>
#include <Qt3DRender/private/qgeometryloaderfactory_p.h>
#include <Qt3DRender/private/qgeometryloaderinterface_p.h>
#include "../../../../src/plugins/geometryloaders/qtgeometryloaders-config.h"
using namespace Qt3DCore;
using namespace Qt3DRender;
Q_GLOBAL_STATIC_WITH_ARGS(QFactoryLoader, geometryLoader,
(QGeometryLoaderFactory_iid, QLatin1String("/geometryloaders"), Qt::CaseInsensitive))
class tst_geometryloaders : public QObject
{
Q_OBJECT
private Q_SLOTS:
void testOBJLoader_data();
void testOBJLoader();
void testPLYLoader();
void testSTLLoader();
void testGLTFLoader();
#ifdef QT_3DGEOMETRYLOADERS_FBX
void testFBXLoader();
#endif
};
void tst_geometryloaders::testOBJLoader_data()
{
QTest::addColumn<QString>("fileName");
QTest::newRow("nominal case") << QStringLiteral(":/cube.obj");
QTest::newRow("trailing space + crlf") << QStringLiteral(":/cube2.obj");
}
void tst_geometryloaders::testOBJLoader()
{
QScopedPointer<QGeometryLoaderInterface> loader;
loader.reset(qLoadPlugin<QGeometryLoaderInterface, QGeometryLoaderFactory>(geometryLoader(), QStringLiteral("obj")));
QVERIFY(loader);
if (!loader)
return;
QFETCH(QString, fileName);
QFile file(fileName);
if (!file.open(QIODevice::ReadOnly | QIODevice::Text)) {
qDebug("Could not open test file for reading");
return;
}
bool loaded = loader->load(&file, QStringLiteral("Cube"));
QVERIFY(loaded);
if (!loaded)
return;
QGeometry *geometry = loader->geometry();
QVERIFY(geometry);
if (!geometry)
return;
QCOMPARE(geometry->attributes().count(), 3);
for (QAttribute *attr : geometry->attributes()) {
switch (attr->attributeType()) {
case QAttribute::IndexAttribute:
QCOMPARE(attr->count(), 36u);
break;
case QAttribute::VertexAttribute:
QCOMPARE(attr->count(), 24u);
break;
default:
Q_UNREACHABLE();
break;
}
}
file.close();
}
void tst_geometryloaders::testPLYLoader()
{
QScopedPointer<QGeometryLoaderInterface> loader;
loader.reset(qLoadPlugin<QGeometryLoaderInterface, QGeometryLoaderFactory>(geometryLoader(), QStringLiteral("ply")));
QVERIFY(loader);
if (!loader)
return;
QFile file(QStringLiteral(":/cube.ply"));
if (!file.open(QIODevice::ReadOnly | QIODevice::Text)) {
qDebug("Could not open test file for reading");
return;
}
bool loaded = loader->load(&file, QStringLiteral("Cube"));
QVERIFY(loaded);
if (!loaded)
return;
QGeometry *geometry = loader->geometry();
QVERIFY(geometry);
if (!geometry)
return;
QCOMPARE(geometry->attributes().count(), 3);
for (QAttribute *attr : geometry->attributes()) {
switch (attr->attributeType()) {
case QAttribute::IndexAttribute:
QCOMPARE(attr->count(), 36u);
break;
case QAttribute::VertexAttribute:
QCOMPARE(attr->count(), 24u);
break;
default:
Q_UNREACHABLE();
break;
}
}
file.close();
}
void tst_geometryloaders::testSTLLoader()
{
QScopedPointer<QGeometryLoaderInterface> loader;
loader.reset(qLoadPlugin<QGeometryLoaderInterface, QGeometryLoaderFactory>(geometryLoader(), QStringLiteral("stl")));
QVERIFY(loader);
if (!loader)
return;
QFile file(QStringLiteral(":/cube.stl"));
if (!file.open(QIODevice::ReadOnly | QIODevice::Text)) {
qDebug("Could not open test file for reading");
return;
}
bool loaded = loader->load(&file, QStringLiteral("Cube"));
QVERIFY(loaded);
if (!loaded)
return;
QGeometry *geometry = loader->geometry();
QVERIFY(geometry);
if (!geometry)
return;
QCOMPARE(geometry->attributes().count(), 3);
for (QAttribute *attr : geometry->attributes()) {
QCOMPARE(attr->count(), 36u);
}
file.close();
}
void tst_geometryloaders::testGLTFLoader()
{
QScopedPointer<QGeometryLoaderInterface> loader;
loader.reset(qLoadPlugin<QGeometryLoaderInterface, QGeometryLoaderFactory>(geometryLoader(), QStringLiteral("gltf")));
QVERIFY(loader);
if (!loader)
return;
QFile file(QStringLiteral(":/cube.gltf"));
if (!file.open(QIODevice::ReadOnly | QIODevice::Text)) {
qDebug("Could not open test file for reading");
return;
}
bool loaded = loader->load(&file, QStringLiteral("Cube"));
QVERIFY(loaded);
if (!loaded)
return;
QGeometry *geometry = loader->geometry();
QVERIFY(geometry);
if (!geometry)
return;
QCOMPARE(geometry->attributes().count(), 3);
for (QAttribute *attr : geometry->attributes()) {
switch (attr->attributeType()) {
case QAttribute::IndexAttribute:
QCOMPARE(attr->count(), 36u);
break;
case QAttribute::VertexAttribute:
QCOMPARE(attr->count(), 24u);
break;
default:
Q_UNREACHABLE();
break;
}
}
file.close();
}
#ifdef QT_3DGEOMETRYLOADERS_FBX
void tst_geometryloaders::testFBXLoader()
{
QScopedPointer<QGeometryLoaderInterface> loader;
loader.reset(qLoadPlugin<QGeometryLoaderInterface, QGeometryLoaderFactory>(geometryLoader(), QStringLiteral("fbx")));
QVERIFY(loader);
if (!loader)
return;
QFile file(QStringLiteral(":/cube.fbx"));
if (!file.open(QIODevice::ReadOnly)) {
qDebug("Could not open test file for reading");
return;
}
bool loaded = loader->load(&file, QStringLiteral("Cube"));
QVERIFY(loaded);
if (!loaded)
return;
QGeometry *geometry = loader->geometry();
QVERIFY(geometry);
if (!geometry)
return;
QCOMPARE(geometry->attributes().count(), 3);
for (QAttribute *attr : geometry->attributes()) {
switch (attr->attributeType()) {
case QAttribute::IndexAttribute:
QCOMPARE(attr->count(), 36u);
break;
case QAttribute::VertexAttribute:
QCOMPARE(attr->count(), 24u);
break;
}
}
file.close();
}
#endif
QTEST_MAIN(tst_geometryloaders)
#include "tst_geometryloaders.moc"