Revision control
- /****************************************************************************
- **
- ** Copyright (C) 2016 Klaralvdalens Datakonsult AB (KDAB).
- ** Contact: https://www.qt.io/licensing/
- **
- ** This file is part of the Qt3D module of the Qt Toolkit.
- **
- ** $QT_BEGIN_LICENSE:LGPL$
- ** Commercial License Usage
- ** Licensees holding valid commercial Qt licenses may use this file in
- ** accordance with the commercial license agreement provided with the
- ** Software or, alternatively, in accordance with the terms contained in
- ** a written agreement between you and The Qt Company. For licensing terms
- ** and conditions see https://www.qt.io/terms-conditions. For further
- ** information use the contact form at https://www.qt.io/contact-us.
- **
- ** GNU Lesser General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU Lesser
- ** General Public License version 3 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.LGPL3 included in the
- ** packaging of this file. Please review the following information to
- ** ensure the GNU Lesser General Public License version 3 requirements
- ** will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
- **
- ** GNU General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU
- ** General Public License version 2.0 or (at your option) the GNU General
- ** Public license version 3 or any later version approved by the KDE Free
- ** Qt Foundation. The licenses are as published by the Free Software
- ** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
- ** included in the packaging of this file. Please review the following
- ** information to ensure the GNU General Public License requirements will
- ** be met: https://www.gnu.org/licenses/gpl-2.0.html and
- ** https://www.gnu.org/licenses/gpl-3.0.html.
- **
- ** $QT_END_LICENSE$
- **
- ****************************************************************************/
+ // Copyright (C) 2016 Klaralvdalens Datakonsult AB (KDAB).
+ // SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
#include "qconegeometryview.h"
#include <Qt3DExtras/qconegeometry.h>
#include <Qt3DCore/qbuffer.h>
#include <Qt3DCore/qattribute.h>
#include <QtGui/QVector3D>
#include <qmath.h>
QT_BEGIN_NAMESPACE
namespace Qt3DExtras {
/*!
* \qmltype ConeGeometryView
* \instantiates Qt3DExtras::QConeGeometryView
* \inqmlmodule Qt3D.Extras
* \brief A conical mesh.
*/
/*!
* \qmlproperty int ConeGeometryView::rings
*
* Holds the number of rings in the mesh.
*/
/*!
* \qmlproperty int ConeGeometryView::slices
*
* Holds the number of slices in the mesh.
*/
/*!
* \qmlproperty bool ConeGeometryView::hasTopEndcap
*
* Determines if the cone top is capped or open.
*/
/*!
* \qmlproperty bool ConeGeometryView::hasBottomEndcap
*
* Determines if the cone bottom is capped or open.
*/
/*!
* \qmlproperty real ConeGeometryView::topRadius
*
* Holds the top radius of the cone.
*/
/*!
* \qmlproperty real ConeGeometryView::bottomRadius
*
* Holds the bottom radius of the cone.
*/
/*!
* \qmlproperty real ConeGeometryView::length
*
* Holds the length of the cone.
*/
/*!
* \class Qt3DExtras::QConeGeometryView
\ingroup qt3d-extras-geometries
* \inheaderfile Qt3DExtras/QConeGeometryView
* \inmodule Qt3DExtras
*
* \inherits Qt3DRender::QGeometryRenderer
*
* \brief A conical mesh.
*/
QConeGeometryView::QConeGeometryView(QNode *parent)
: Qt3DCore::QGeometryView(parent)
{
QConeGeometry *geometry = new QConeGeometry(this);
QObject::connect(geometry, &QConeGeometry::hasTopEndcapChanged, this, &QConeGeometryView::hasTopEndcapChanged);
QObject::connect(geometry, &QConeGeometry::hasBottomEndcapChanged, this, &QConeGeometryView::hasBottomEndcapChanged);
QObject::connect(geometry, &QConeGeometry::topRadiusChanged, this, &QConeGeometryView::topRadiusChanged);
QObject::connect(geometry, &QConeGeometry::bottomRadiusChanged, this, &QConeGeometryView::bottomRadiusChanged);
QObject::connect(geometry, &QConeGeometry::ringsChanged, this, &QConeGeometryView::ringsChanged);
QObject::connect(geometry, &QConeGeometry::slicesChanged, this, &QConeGeometryView::slicesChanged);
QObject::connect(geometry, &QConeGeometry::lengthChanged, this, &QConeGeometryView::lengthChanged);
QGeometryView::setGeometry(geometry);
}
/*! \internal */
QConeGeometryView::~QConeGeometryView()
{
}
void QConeGeometryView::setHasTopEndcap(bool hasTopEndcap)
{
static_cast<QConeGeometry *>(geometry())->setHasTopEndcap(hasTopEndcap);
}
void QConeGeometryView::setHasBottomEndcap(bool hasBottomEndcap)
{
static_cast<QConeGeometry *>(geometry())->setHasBottomEndcap(hasBottomEndcap);
}
void QConeGeometryView::setTopRadius(float topRadius)
{
static_cast<QConeGeometry *>(geometry())->setTopRadius(topRadius);
}
void QConeGeometryView::setBottomRadius(float bottomRadius)
{
static_cast<QConeGeometry *>(geometry())->setBottomRadius(bottomRadius);
}
void QConeGeometryView::setRings(int rings)
{
static_cast<QConeGeometry *>(geometry())->setRings(rings);
}
void QConeGeometryView::setSlices(int slices)
{
static_cast<QConeGeometry *>(geometry())->setSlices(slices);
}
void QConeGeometryView::setLength(float length)
{
static_cast<QConeGeometry *>(geometry())->setLength(length);
}
/*!
* \property QConeGeometryView::hasTopEndcap
*
* Determines if the cone top is capped or open.
*/
bool QConeGeometryView::hasTopEndcap() const
{
return static_cast<QConeGeometry *>(geometry())->hasTopEndcap();
}
/*!
* \property QConeGeometryView::hasBottomEndcap
*
* Determines if the cone bottom is capped or open.
*/
bool QConeGeometryView::hasBottomEndcap() const
{
return static_cast<QConeGeometry *>(geometry())->hasBottomEndcap();
}
/*!
* \property QConeGeometryView::topRadius
*
* Holds the top radius of the cone.
*/
float QConeGeometryView::topRadius() const
{
return static_cast<QConeGeometry *>(geometry())->topRadius();
}
/*!
* \property QConeGeometryView::bottomRadius
*
* Holds the bottom radius of the cone.
*/
float QConeGeometryView::bottomRadius() const
{
return static_cast<QConeGeometry *>(geometry())->bottomRadius();
}
/*!
* \property QConeGeometryView::rings
*
* Holds the number of rings in the mesh.
*/
int QConeGeometryView::rings() const
{
return static_cast<QConeGeometry *>(geometry())->rings();
}
/*!
* \property QConeGeometryView::slices
*
* Holds the number of slices in the mesh.
*/
int QConeGeometryView::slices() const
{
return static_cast<QConeGeometry *>(geometry())->slices();
}
/*!
* \property QConeGeometryView::length
*
* Holds the length of the cone.
*/
float QConeGeometryView::length() const
{
return static_cast<QConeGeometry *>(geometry())->length();
}
} // namespace Qt3DExtras
QT_END_NAMESPACE